The following text may be saved and printed or editted in virtually any word processor. Print it and use it when you order from us.

The order form can be faxed or posted to us for a quotation for your exact requirements

ELECTRICS & LIGHTING:
	 Side lamp l/h airflow						LCSCE 1 
	 Side lamp r/h airflow						LCSCE 2
	 Side lamp l/h non airflow					LCSCE 3
	 Side lamp r/h non airflow					LCSCE 4
	 Rear lamp r/h							LCSCE 5
	 Rear lamp l/h							LCSCE 6
	 Interior lamp cover						LCSCE 7
	 light switch dash						LCSCE 8
	 Headlamp assy.							LCSCE 9
	 Regulator							LCSCE 10
	 Dynamo								LCSCE 11
	 Starter motor							LCSCE 12
	 Grey loom clips						LCSCE 13
	 Grey loom tape							LCSCE 14
	 Wiring loom I/h						LCSCE 15
	 Wiring loom r/h						LCSCE 16
	 Number plate lamp						LCSCE 17

ADDITIONS:
	Interior trim panels						LCSCI 18
	Loop pile carpet						LCSCI 19
	Dash crash pads early						LCSCI 20
	Dash crash pads airflow						LCSCI 21
	Gearknobs, early and late					LCSCI 22
	Keyrings							LCSCI 23
	Petrol neck filler grommets					LCSF 16
	Selector Fork 1st and 2nd gear					LCSG 26
	Selector Fork 3rd and 4th gear					LCSG 27
	Synchro hub 1st and 2nd gear					LCSG 28
	Synchro hub 3rd and 4th gear					LCSG 29
	Synchro hub rings 1st and 2nd gear				LCSG 30
	Synchro hub rings 3rd and 3th gear				LCSG 31

	Front Bilstein Shock absorbers complete
	Front Bilstein 260-60 insert - forest
	Front Bilstein 300-70 insert - tarmac
	Front Bilstein gaiters
	Rear Bilstein shock absorbers - forest/tarmac
	Tandem brake system - road
	Tandem brake system - rally
	Tandem brake system - race
	Bellhousing alloy twin cam to ZF
	Reverse idler gear gearbox
	Input oil seal housing - late type seal gearbox
	Exhaust manifold F.I.A. 1 5/8 inch, 1 3/4 inch, 2 inch R.H.D.
	Exhaust manifold F.I.A. 1 5/8 inch, 1 3/4 inch, 2 inch L.H.D.
	Exhaust manifold NONE F.I.A. 1 3/4 inch, 1 7/8 inch, 2 1/2 inch RHD
	Exhaust manifold NONE F.I.A. 1 3/4 inch, 1 7/8 inch, 2 1/2 inch LHD
	Co axial hydraulic clutch unit assy's
	Weber 28/36 D.C.D. carbs
	Weber 40 D.C.O.E. carbs
	Weber 45 D.C.O.E. carbs
	Weber 48 D.C.O./SP carbs
	Weber 50 D.C.O./SP carbs
	Weber carb kits/mounts etc.
	B.D.A. timing belt covers - red or black
	Bell housing alloy twin cam to rocker 5 speed
	A.R.P. Stud/bolt kits
	B.D.G. Head gaskets 90.4mm
	Cosworth alloy finned cam covers (pre Xflow or Xflow)
	B.D.A. Exhaust manifolds 1 3/4 inch, 2 inch, 2 1/4 inch three piece,3 bolt
	B.D.A. Exhaust manifolds 1 7/8 inch, 2 1/8 inch, 2 1/2 inch three piece,3 bolt
	Magnesium gearbox casing  2000E

	Spares Books
	Workshop manuals
	Handbooks
	Posters	
	Twin Cam badges
	Chassis plate stamping service as original


ENGLISH L.S.D. AXLE SPARES

ENGLISH L.S.D.s PLATE TYPE STEEL

STEEL MAIN HOUSINGS

STEEL END PLATES

L.S.D. CLUTCH PACKS (Fo. Mo. Co.)

PINION BEARINGS

SIDE BEARINGS

PINION OIL SEALS

PINION CRUSH SLEEVES

PINION LOCK NUTS

L.S.D. PRESSURE SHIMS .05, .10, .20

DIFF CASKETS

L.S.D. COUNTER-SUNK BOLTS

HEAVY DUTY CROWNWHEEL BOLTS

PINION FLANGES

L.S.D.INTERNAL PACKS

C.W.P. RATIOS 3.7, 3.5, 3.9, 4.4, 4.1, 4.9, 4.7, 5.3, 5.1, 5.8

L.S.D. OIL

ALLOY DIFF NOSES

MAGNESIUM DIFF NOSES

THREE RAIL GEARBOX SPARES

GEARKITS STRAIGHT CUT

         RATIO'S 2.5  1.66  1.22  1.1  2.25  1.495 1.168 1.1

SYNCHRO HUBS 1st AND 2nd

SYNCHRO HUBS 3rd AND 4th

SYNCHRO OUTER RINGS 1st AND 2nd

SYNCHRO BLOCKER BARS 1st AND 2nd, 3rd AND 4th

SYNCHRO BLOCKER RINGS

INPUT AND OUTPUT SEALS

TAIL HOUSING BUSHES

GASKET SETS

LAYSHAFTS

LAYSHAFT NEEDLE ROLLERS

LAYSHAFT THRUST WASHERS

MAINSHAFT BEARINGS

INPUT SHAFT CAGED BEARING

HEAVY DUTY SELECTOR FORKS 1st AND 2nd, 3rd AND 4th

MAINSHAFT CIRCLIPS

ALLOY MAINCASE

ALLOY BELL HOUSING

ALLOY TAIL HOUSINGS (EARLY)

ALLOY TAIL HOUSINGS (LATh)

ALLOY REMOTES

ALLOY QUICKSHIFTS (LATE TAIL HOUSING)


RACING SPARES:
	Gas Shock Absorbers, front					RACE 51
	Gas Shock Absorbers, rear					RACE 52
	Alloy front hubs 1/2" track increase				RACE 53
	Alloy front hubs 3/4" track increase				RACE 54
	10.5" vented front discs					RACE 55
	Alloy disc bell for above					RACE 56
	10.5" vented rear discs						RACE 57
	Alloy disc bell for above					RACE 58
	Solid discs, rear						RACE 59
	Alloy four pot caliper, front					RACE 60
	Alloy four pot caliper, rear					RACE 61
	Alloy two pot coliper, rear					RACE 62
	Rear anti roll bar						RACE 63
	Heavy duty engine mounts					RACE 64
	Heavy duty front suspension top mounts				RACE 65
	Alloy front suspension top mounts				RACE 66
	Competition composite head gaskets 83.5mm			RACE 67
	Competition composite head gaskets 87mm				RACE 68
	Heavy duty suspension bushes					RACE 69
	Alloy bellhousing to rocket gearbox				RACE 70
	Alloy bellhousing to 5-speed gearbox				RACE 71
	Alloy gearbox casing						RACE 72


MK I LOTUS CORTINA RACING SPARES


1.	1 inch diameter Front Sway Bar with increased camber
2.	Rose jointed front Top Suspension Mountings
3.  	Adjustable Front Suspension Legs standard springs
4.  	Adjustable Front Legs with adjustable 2 1/2" spring platforms
5.	Springs for above, standard and 2 1/2" dia. Eacing Rates
6.	Vented Front Disc Brake Kits
7.	Racing Disc Pads
8.	Bullit Gear Kits 2.5 first gear fully cyncro
9.	Alloy and magnesium Bell Housings
10.	Alloy Gearbox Remote Housings and Tail Housings
11.	ALL Racing Engines and Parts stocked
12.	C.W.P.s  5.3, 5.1, 4.9, 4.7 Ratios
13.	Heavy duty Half Shafts
14.	L.S.D.s
15.	Racing adjustable Rear Shock Absorbers 
				(leaf spring car and A-frame car)
16.	Axle Brace Kits
17.	Front inner Wing Strut Brace Bar
18.	Alloy and Magnesium Diff Noses
19.	Rear Disc Brake Kits
20.	Alloy Door Skins, Bonnets, Boots
21.	High Ratio Steering Box Kits
22.	Early Lotus Cam Covers
23.	B.R.M. Cam Covers
24.	New Twin Cam Heads standarci and racing
25.	A-frame Units
26.	Single Leaf Spring 146 lbs. Rate
27.	Single Leaf Springs 168 lbs. Rate
28.	As above but flat-ended by 2 inches
29.	Competition Bushes for above
30.	Minilite Magnesium 6 x 13 and 7 x 13
31.	Rose jointed Lower Control Arms Front
32.	Roll Bars FlA Standard
33.	Alloy Long Range Fuel Tanks foam filled
34.	Back Axle Automatic Oil Cooler Kits
35.	Engine Oil Cooler Kits
36.	Engine Dry Sump Kits and Tanks
37.	Kenlow Radiator Fans
38.	Bullit Dog Gearboxes (see below for specification)
39.	Hydraulic Hand Brake Kits
40.	Fibreglass Fuel Tanks standard fitment
41.	All Alloy Bonnets Racing Cars
42.	All Alloy Boots Racing Cars
43.	Extra long Wheel Studs
44.	Large capacity Radiators (cooling system)
45.	Brand new L-Blocks plus second hand units
46.   	Racing Exhaust Manifolds two types size
47.	Brake Bias Valves
48.	Fibreglass Boots and Bonnets
49.	Race Flexy Brake Hoses (Goodrich) (Aeroquip)
50.	Laminated Windscreens


Specification for Bullitt Dog Gearbox Competition Type

Ratios 1st 2.50; 2nd 1.66; 3rd 1.22; 4th 1.1
Ratios 1st 2.555; 2nd 1.495; 3rd 1.168; 4th 1.1

to fit Ford 3-Rail Gearboxes. Kit includes:
Input Shaft, Laygear, Gears, Tailshaft, Dogs.
Dog Spec is to latest Ford Sierra Cosworth 4x4 rally car.

Alternative Kit to raise 2.5, 1.66, 1.22 kit to 2.255, 1.495, 1.168
includes input shaft, laygear and 3rd gear.

Also Bearing Kits and Layshafts and GearBox Gaskets available.

Home	Who we are	Order Form	Engine Parts	Running Gear	Body Parts	Other